A silicone product use, the human body

Production such as sex products, human organs, body shape, breast pad, shoulder pad, patch, mat and other flexible silicone rubber products.

Second, the human body the silicone product features

1, the human body to be a two-component silicone molding heating or at room temperature vulcanized silicone rubber, this product is colorless or color flow liquid, low hardness, good resistance to tear and color after curing have good sense and texture characteristics; Products can also be used for injection molding process.

2, this product can use for a long time under - 65 ℃ to 200 ℃, and keep its soft and elastic performance, excellent electric properties and chemical stability, water resistance, ozone resistance, weathering resistance, no corrosion, has a physiological inertia, avirulent insipidity, line shrinkage rate is low, easy to operate, etc.

Three silicone technology parameters, the human body

Type of hardness (A0) viscosity (Mpa) s) tearing (KN/m) stretch (Mpa), elongation (%)

1500 1500 + 5000 2 2 p 500 or higher

1505 5 + 2 for 6000 + 500 4 or 2.5 p. 550

1510 10 + 2 to 6500 + 500 13 3 p 500 or higher

20 + 10000 + 1000 2 1520 acuity 16 3.5 p. 400

1530 to 30 + 20000 + 2000 acuity 18 4.5 p. 350

40-1540 2 22000 22000 + 2000 or 20 4.5 or greater

Note: the parameters in the table colloid viscosity, color, transparency, hardness, etc according to the customer's demand.

Fourth, use silica gel method

Will A and B components according to the weight proportion mix, after vacuum exhaust bubble, injection forming model of heating or as an injection molding process.

Five, the human body the silicone storage and matters needing attention

1, add molding products are non-dangerous goods, shall be sealed and store in a cool place, avoid sharp.

2, add molding products with tin, phosphate, ammonium, water, chlorine, such as carboxylic acid, mercaptan, hydroxyl compounds toxic reaction will happen; Use of prohibited and such compounds in contact, avoid not curing phenomenon.