Construction technology of mould rubber, silicone rubber for culture stone mold usually belong to the type of two-component condensed a greenhouse vulcanization silicone rubber, is especially for culture stone, sand carving sandstone art, large city botanical garden sculpture mold rubber of choice for production. Good tensile, high tensile strength, easy operation, used for BaoMo, perfusion, mold is more suitable for all kinds of size, shape, moulds of complex stone, gypsum and cement replication, pattern fine product silicone mold production.

Construction technology of mould rubber, silicone rubber for culture stone mold areas of application:

Especially suitable for the large stone, plaster, cement and other building decoration, furniture decoration industry mould making, also can be used for the simulation of plants and animals sculpture, resin handicraft, gypsum, craft gifts, handicrafts, polly culture stone replication, Buddha carving handicraft industries replication process set decoration products and the silicone mold production.

Construction process mold of rubber, silicone rubber for culture stone mold main performance characteristics:

1, not deformation, high temperature resistance, resistance to acid and alkali, not the characteristics of expansion.

2, good weatherability and rolling over more, line shrinkage rate is low.

3, pull, good elasticity, high tensile strength, long service life.

4, fast curing at room temperature, can according to customer's product requirements, adjust the production.

5, has better resistance to hydrolysis, more suitable for all kinds of size, shape, complex mold and used for moulds such as gypsum, stone, cement production.

Construction technology of mould rubber, silicone rubber for culture stone mold of the operating instructions:

Culture stone mold dedicated to white or translucent liquid liquid silicone, generally products after curing, the hardness of 40 + / - 2 a °. If the customer need to do bulk products, such as open shard mold, mold the silicone liquid with high hardness to do die, on the contrary, the decorative pattern of complex and delicate small mould, such as BaoMo, must use soft liquid mold silicone to make mould. Curing agent content, can according to the actual needs of customers, for quick dry, quick to take off the mold, corresponding to add curing agent. On the contrary, if you need to slowly release, add a little less curing agent (but the amount of curing agent added up to more than 5%).

(note: this company product does not claim to add silicone oil, special soft silicone mold or complex pattern and precision of tiny, can join a 5% 10% silicone oil to adjust the silicone mold of softness, so that mold release.)