Types: high tenacity

Origin: shenzhen,

Material: silica gel

Color: white, translucent

Product description: gypsum mold used to make mold of silica gel, silica gel is a kind of perfusion model generally adopts the hardness of soft silicone to do mold, parting easier, so will not damage the inside of the silicone mold products. Plaster mold silicone in addition to the application in the field of RTV - 2 mold plastic, is particularly applicable to...

【 introduction 】

Plaster mold used to make mold of silica gel, silica gel is a kind of perfusion model generally adopts the hardness of soft silicone to do die, so release more easily, does not damage the inside of the silicone mold products.

Plaster mold silicone features:

(1) a lower linear shrinkage rate and low viscosity, liquidity is better;

(2) don't emit low molecular by-products because of sulfide, the sulfide from top to bottom, from inside to outside synchronization into, deep sulfide, does not exist because of the by-product of small molecules in addition to not clean and under certain conditions, such as closed), high temperature make the mold after tack degradation phenomenon;

(3) plus molding adhesive has better resistance to hydrolysis, more suitable for all kinds of size, shape, complex mold and large gypsum, stone, cement and other mould used for the production.

[methods] the

Plaster mold silicone to white liquid liquid, general product after curing, the hardness of 22 - a ° 50, etc. If the customer need to do bulk products, such as open shard mold, mold the silicone with high hardness to do die, on the contrary, the decorative pattern of complex and delicate small mould, such as BaoMo, must use the soft mold silicone to make mould. Solid agent to add quantity according to the actual requirements of the clients, for quick dry, quick to take off the mold, corresponding to add curing agent. On the contrary, slowly release, add a little less curing agent (but the amount of curing agent added up to not more than 5%)