MW - 224 silicone thermal transfer water transfer printing treatment

A, use method

1. Clean oil, water and impurity on the surface of the silica gel products, etc.

2. The silica gel treated with flame before the spray MW - 224 treatment agent on the surface of silica gel. With the temperature of the 150-150 degrees bake for 30 minutes. The next step can conduct heat transfer or water transfer printing technology.

Second, the storage method

Storage areas... open, away from the heat source, prevent electrostatic, and direct sunlight (sunlight) and hit so hard; Away from fire, acid, alkali and flammable materials. Should have good ventilation, room temperature should be below 25 oc storage; Straight at room temperature is higher than 25 oc above will greatly shorten the storage time.

Packing: 3-15 kg