The ship model silicone

Type: the high temperature resistant type

Origin: shenzhen,

Material: silica gel

Color: white, translucent

Product description: a model ship silica gel is a kind of silicone rubber is mainly used to make hand model. Normal for liquid, adjustable color; When using a proportional can add curing agent curing within a few hours...

【 introduction 】

Model ship silica gel is a kind of silicone rubber is mainly used to make hand model. Normal for liquid, adjustable color; When using a proportional can add curing agent curing within a few hours. Remove hand-board model manufacture, can also be small bulk copy products.

The ship model silicone operating key points:

1. The model ship silica gel used in the small model or pattern fine products. To make the mould with silicon degrees of soft silicone, this is because the precision of small products, at the stripping time, mould as the inside of the article is damaged, so the soft silicone must be used to manufacture of moulds.

2. If you are doing big product copy or do large products, be sure to use high hardness of silica gel for mold, so as to make the product deformation.

[methods] the

Part A is white liquid flows, part B is curing agent. For example: take 100 grams of silica gel, add 2% of curing agent, part A and part B two to stir, stir well, let the mucilage on the chamber for deaeration, vacuum processing, using smoked vacuum liquid silicone, injection frame you want to copy product or above.

Note: this product is used for coating or scraping the glue process, is to make you want to copy product or model, with glue on the flat board, all round with wooden box, don't let mucilage leaking, 100: two uniform proportion mix silicone and curing agent, and then pour on the products or models to copy, or brush besmear to brush evenly with board, such as silica gel dry hind, again plaster will die box filled with water.

【 introduction 】

Model ship silica gel is a kind of silicone rubber is mainly used to make hand model. Normal for liquid, adjustable color; When using a proportional can add curing agent curing within a few hours. Remove hand-board model manufacture, can also be small bulk copy products.

The ship model silicone operating key points:

1. The model ship silica gel used in the small model or pattern fine products. To make the mould with silicon degrees of soft silicone, this is because the precision of small products, at the stripping time, mould as the inside of the article is damaged, so the soft silicone must be used to manufacture of moulds.

2. If you are doing big product copy or do large products, be sure to use high hardness of silica gel for mold, so as to make the product deformation.

[methods] the

Part A is white liquid flows, part B is curing agent. For example: take 100 grams of silica gel, add 2% of curing agent, part A and part B two to stir, stir well, let the mucilage on the chamber for deaeration, vacuum processing, using smoked vacuum liquid silicone, injection frame you want to copy product or above.

Note: this product is used for coating or scraping the glue process, is to make you want to copy product or model, with glue on the flat board, all round with wooden box, don't let mucilage leaking, 100: two uniform proportion mix silicone and curing agent, and then pour on the products or models to copy, or brush besmear to brush evenly with board, such as silica gel dry hind, again plaster will die box filled with water.

【 introduction 】

Model ship silica gel is a kind of silicone rubber is mainly used to make hand model. Normal for liquid, adjustable color; When using a proportional can add curing agent curing within a few hours. Remove hand-board model manufacture, can also be small bulk copy products.

The ship model silicone operating key points:

1. The model ship silica gel used in the small model or pattern fine products. To make the mould with silicon degrees of soft silicone, this is because the precision of small products, at the stripping time, mould as the inside of the article is damaged, so the soft silicone must be used to manufacture of moulds.

2. If you are doing big product copy or do large products, be sure to use high hardness of silica gel for mold, so as to make the product deformation.

[methods] the

Part A is white liquid flows, part B is curing agent. For example: take 100 grams of silica gel, add 2% of curing agent, part A and part B two to stir, stir well, let the mucilage on the chamber for deaeration, vacuum processing, using smoked vacuum liquid silicone, injection frame you want to copy product or above.

Note: this product is used for coating or scraping the glue process, is to make you want to copy product or model, with glue on the flat board, all round with wooden box, don't let mucilage leaking, 100: two uniform proportion mix silicone and curing agent, and then pour on the products or models to copy, or brush besmear to brush evenly with board, such as silica gel dry hind, again plaster will die box filled with water.